221 west industry court 3 deer park, ny 11729 - 4681 3 (631) 586 - 7600 fax (631) 242 - 9798 world wide web site - h ttp://www.sensitron.com e - mail address - sales@sensitron.com sensitron semiconductor technical data data sheet 4214, rev - zener 0.5w voltage regulator part number: 1C6330 configuration: zener 0.5w voltage regulator - all ra tings are @ tc = 25 c unless otherwise specified. - operating temp.: - 55 c to +175 c - s torage temp.: - 65 c to +175 c maximum ratings / electrical characteristics symbol value units nominal zener voltage 5% @ i z2 v z2 nom 18.0 vdc min zener voltage @ 250 m a v z1 min 16.6 vdc test current i z2 7 mamps dc maximum impedance @ i z2 max z z 14 ohm reverse voltage v r 14.0 vdc maximum reverse current max i r1 0.05 uamps dc maximum reverse current @ t a = +150 o c max i r2 10 uamps dc max imum knee impedance @ 250 m a max z k 600 ohm maximum voltage regulation max v z (reg) 0.85 vdc maximum temperature coefficient * a v z 0.085 %/c power dissipation * p ower 0.5 watts * adequate energy absorption should be provided. mechanical dimensions: in inches (mm) 1C6330 bottom side metalization: al - 25 k? minimum or ti/ni/ag - 30 k? minimum. top side metalization: al - 25 k? minimum or ti/ni/ag - 30 k? minimum. bottom side is anode, top side is cathode. 0.010 0.001 (0.254 0.025) cathode anode 0.020 0.003 (0.508 0.076) 0.034 0.003 (0.864 0.076) cathode
? 221 west industry court deer park, ny 11729-4681 (631) 586-7600 fax (631) 242-9798 ? ? world wide web - http://www.sensitron.com ? e-mail address - sales@sensitron.com ? sensitron semiconductor technical data disclaimer: 1- the information given herein, including the specifications and dimens ions, is subject to change wi thout prior notice to impr ove product characteristics. before ordering, purchas ers are advised to contact the sensitron semiconductor sales department for the latest version of the datasheet(s). 2- in cases where extremely high reliabilit y is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices t hat feature assured safety o r by means of users? fail-safe prec autions or other arrangement. 3- in no event shall sensitron semiconducto r be liable for any damages that may result from an accident or any other cause duri ng operation of the user?s units according to the datasheet(s). sensitron semiconducto r assumes no responsibility for any intellec tual property claims or any other problems that may result from applications of informatio n, products or circuits described in the d atasheets. 4- in no event shall sensitron semiconduc tor be liable for any failure in a semic onductor device or any secondary damage result ing from use at a value exceeding the absolute maximum rating. 5- no license is granted by the datasheet(s) under any patents or other rights of any third party or sensitron semiconductor. 6- the datasheet(s) may not be reproduced or duplicated, in any form , in whole or part, without the expressed written permissio n of sensitron semiconductor. 7- the products (technologies) de scribed in the datasheet(s) are not to be provi ded to any party whose purpose in their applica tion will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or a ny third party. when exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws a nd regulations.
|
